Printed in Vancouver · Full colour

Custom Signs

Pick a size and a material, upload your art, and we print it rigid — for a window, a lawn, a job site or a trade show wall.

Size
in in
Material Compare materials ↓
Options Grommets, stakes & more in the studio
Sides
Laminate
SignStudio Supply at 24.5″ × 36.5″ (62.2 × 92.7 cm)
Drop your artwork here PDF, JPG, PNG or AI
Your sign 24″ × 36″ Coroplast One side Matte
$36.91 Tax added at checkout
  • Order Upload your art on this page
  • Free proof Within 1 business day
  • Ready 3 business days after you approve
  • Pickup · free 44 W 6th Ave, Vancouver Pickup info
  • Shipping · Canada 1–5 days via courier Shipping info

What you get

One sign, made to your size, in whichever material suits where it is going.

  • 4 materials Printed the same on all of them — Coroplast, Polystyrene, Alupanel, and Foamcore. What changes is how long it lives outside and what it feels like in the hand.
  • Any size up to 48″ × 96″ (122 × 244 cm) Typed in inches or centimetres, not picked from a list, and either way up. Bigger than one sheet and we panel it — ask us.
  • Full colour, one side or two No extra charge for colour and no limit on how much of it you use. Print both sides when the sign will be seen from both directions — a front and a back, two different artworks.
  • Laminate if you want it Matte or gloss. It protects against scratches and fading, and it is the same price either way — the finish is a look, not an upcharge.
  • Grommets or a ground stake Grommets to hang it, a stake to plant it. Both if you need both — and tell us where you want the holes.
  • A proof before anything prints You see the finished size and the artwork on it and say yes. Every order, no charge.

Which material?

The same print goes on all four. What the board underneath decides is where the sign can live and what you can fix it to.

Coroplast

The lawn-sign and job-site classic. Light, weatherproof, and it takes stakes and zip ties. Two thirds of the signs this shop prints are on it.

Outdoors
Yes
Takes
Grommets and Ground stake
At 24″ × 36″
$30.85

Polystyrene

A smooth solid face rather than flutes, so the print reads crisper close up. Suits windows, counters and anywhere the sign is looked at from a few feet.

Outdoors
Yes
Takes
Grommets and Ground stake
At 24″ × 36″
$35.73

Alupanel

Aluminium skins over a solid core. Flat, rigid and rustproof — the one to pick when the sign is going up and staying up. Grommets are drilled rather than punched, so they are priced per hole.

Outdoors
Yes
Takes
Grommets
At 24″ × 36″
$41.33

Foamcore

Presentation boards, easels and trade-show tables. The lightest of the four and the only one that is no good in the rain — it dents and it warps.

Outdoors
No — indoor only
Takes
Neither — it is a board, not a hanging sign
At 24″ × 36″
$37.68

Each price is the cheapest one sign you can buy in that material, and moves with the size at the top of the page. Anything you add above is on top of it.

Setting up your artwork

SignStudio checks all of this for you when you upload — these are here if you would rather set the file up first.

Trim
24″ × 36″the finished size
Supply at
24.5″ × 36.5″run artwork 0.25″ past the cut on every edge
Safe zone
23″ × 35″keep text and logos inside this — 0.5″
Your artwork
Bleed — runs off the edge Trim — where we cut Safe — text inside here Bleed and safe zone drawn thicker than they are, so you can see them.

You asked, we answered

Which material should I pick?
Outdoors and on a budget, Coroplast — it is the fluted plastic most yard and site signs are made of. Outdoors and permanent, Alupanel: aluminium composite, rigid, the most durable thing here. Polystyrene is thin and slightly flexible, and Foamcore is indoor only — light and rigid, but it will not survive weather.
My artwork is a different shape to the size I picked. What happens?
Tell us in the box at the bottom and we will do what you ask — crop it, or add a margin. If you say nothing, a person looks at it during proofing and asks before anything prints. You will not get a stretched sign by accident.
Can I choose where the grommets go?
Yes. Left alone they go in the corners and every couple of feet along the edges. If you need them somewhere specific — top corners only, centred top and bottom, lined up with existing bolts — say so in the box at the bottom and we will follow it.
Can I get it printed on both sides?
Yes — pick "Both sides" under Options and the price updates. You will be asked for two artworks rather than one, a front and a back, because they are two different files.
What size can I get?
Anything from a few inches up to 48″ × 96″ (122 × 244 cm) in one piece, either way up — that is the sheet every rigid board arrives on. Larger than that we make in panels, which needs a quote first so we can tell you where the joins land.
Do I have to upload artwork now?
No. Order it and send the file after — we email you where to send it. Nothing goes to print until you have approved a proof either way.