Banners

Mesh Banners

Perforated vinyl that lets air and light pass through — the right call for fences, railings, scaffolding and any spot that catches wind.

  • Wind passes through — stays put on fences
  • Full-colour print, UV and weather resistant
  • Grommets and hems included, any size
Size
Any size ft ft

The short side tops out at 5 ft — that is the roll. Anything bigger is seamed, and we quote it. Ask for a quote →

Finishing All included
Artwork Print size 3′ × 2′ (36″ × 24″)
SignStudio Supply at 36″ × 24″ (91.4 × 61 cm)
Drop your artwork here PDF, JPG, PNG or AI
Your banner 3′ × 2′ 9oz mesh vinyl Hem + grommets
$37.80 Tax added at checkout
  • Order Upload your art on this page
  • Free proof Within 1 business day
  • Ready 3 business days after you approve
  • Pickup · free 44 W 6th Ave, Vancouver Pickup info
  • Shipping · Canada 1–5 days via courier Shipping info

Built for the fence line

Mesh gives up a little colour punch for a lot of wind resistance. Here is what that buys you.

Mesh Banners: 30% air flowMesh Banners
  • 30% air flow Thirty percent of the surface is small holes, so gusts pass through instead of turning the banner into a sail.
  • See-through from behind Keeps sightlines open on construction hoarding and event fencing.
  • 9oz mesh vinyl Tear-resistant base, lighter than scrim, and easier on the fence it is tied to.
  • Grommets every 2 ft Brass grommets in a double-stitched hem — zip-tie it and walk away. Or tell us exactly where you want them.
  • Any size up to 5 ft on the short side That is the width of the roll. Wider than that we seam, and we quote it first so there are no surprises.
  • A proof before anything prints You see the finished size and the grommet positions and say yes. Every order, no charge.

Scrim or mesh?

Same print, same grommets, same price. The difference is what happens when the wind picks up.

Scrim banners compared with mesh banners
Property Scrim banner Mesh banner
Best spot Walls, storefronts, stages Fences, railings, scaffolding
Colour Boldest — solid face Slightly softer
Wind Catches it Passes through
See-through None Partial
Material 13oz scrim vinyl 9oz mesh vinyl
Price Identical Identical

Rule of thumb: fence = mesh, wall = scrim.

Switch to scrim →
Artwork specs

Set your artboard to the finished size at 150 dpi, add 0″ of bleed all round, and keep text 0.5″ in from the edge — grommets land in that margin. We check every file against this during proofing anyway.

Setting up your artwork

SignStudio checks all of this for you when you upload — these are here if you would rather set the file up first.

Trim
36″ × 24″the finished size
Safe zone
35″ × 23″keep text and logos inside this — 0.5″
Your artwork
Bleed — runs off the edge Trim — where we cut Safe — text inside here Bleed and safe zone drawn thicker than they are, so you can see them.

You asked, we answered

Mesh or scrim — what is the difference?
Mesh lets air and light through, so it survives wind on a fence. Scrim is solid, so colours pop harder on a wall. Same print, same grommets, and the price is identical.
Will people see through it?
Somewhat, especially from the shaded side. That is a feature on fencing and a problem on a stage backdrop — pick scrim there.
Do you print double-sided?
Single-sided only. Mesh shows a faint reverse image through the back anyway.
How do I hang it?
Zip ties, bungees or rope through the grommets. Keep it taut — a slack banner flaps, and flapping is what wears a banner out.
What size can I get?
Anything from 2 to 40 ft wide and up to 5 ft on the short side, in one-inch steps. Bigger than that and we seam it — ask for a quote.
Category: