Replacement Banners
X Banner Stand 24″ – Replacement Graphic
A new 24 × 63″ graphic for an X banner stand you already own — grommeted at all four corners, ready to hook straight on.
- Fits any 24 × 63″ X stand
- Grommets at all four corners
- Keep the stand, change the message
Make sure the link is shared as “anyone with the link”. We’ll check the file ourselves and email you a proof.
- Check out now and we hold your spot in the queue.
- Reply to our email with your files — it arrives straight after checkout.
- Approve your proof and nothing prints until you do.
- Order Upload your art on this page
- Free proof Within 1 business day
- Ready 3 business days after you approve
- Pickup · free 44 W 6th Ave, Vancouver Pickup info
- Shipping · Canada 1–5 days via courier Shipping info
What 13oz scrim buys you
This is the workhorse outdoor banner — heavier, brighter and tougher than the thin stuff sold online.
- Boldest colour A bright white PVC face takes full-strength ink, so logos and photographs look the way they were designed to.
- 13oz, reinforced A 9x9 polyester weave laminated between vinyl layers — tear-resistant, not the tissue paper that turns up online.
- Indoors or out Rain, sun and salt air do not bother it. Hang it taut and it keeps looking new far longer.
- Grommets every 2 ft Brass grommets in a double-stitched hem — zip-tie it and walk away. Or tell us exactly where you want them.
- Any size up to 5 ft on the short side That is the width of the roll. Wider than that we seam, and we quote it first so there are no surprises.
- A proof before anything prints You see the finished size and the grommet positions and say yes. Every order, no charge.
Set your artboard to the finished size at 150 dpi, add 0″ of bleed all round, and keep text 1″ in from the edge. We check every file against this during proofing anyway. Keep the four corners clear by 1.5″ — that is where the grommets go.
Setting up your artwork
SignStudio checks all of this for you when you upload — these are here if you would rather set the file up first.
- Trim
- 24″ × 63″the finished size
- Safe zone
- 22″ × 61″keep text and logos inside this — 1″, 1.5″ at the corners
What X Banner Stand 24" - Replacement Graphic actually buys you
24×63″ Graphic for an existing Banner Stand.
You asked, we answered
- Scrim or mesh — what is the difference?
- Scrim is solid vinyl, so colours pop and nothing shows through. Mesh lets air pass, so it survives wind on a fence. Same print, same grommets, and the price is identical.
- Can I hang it on a fence?
- You can, but a solid banner catches wind like a sail. On a fence or a railing we will steer you to mesh.
- Do you print double-sided?
- Single-sided only. For two faces, order two and we hang them back-to-back.
- How do I hang it?
- Zip ties, bungees or rope through the grommets. Keep it taut — a slack banner flaps, and flapping is what wears a banner out.
- What size can I get?
- Anything from 2 to 40 ft wide and up to 5 ft on the short side, in one-inch steps. Bigger than that and we seam it — ask for a quote.

















